topic Re: BL C3000 installation in BladeSystem - General

BL C3000 installation

inex — Wed, 09 Dec 2009 22:38:49 GMT

Hi
Anyone got any hints for what to look out for when installaing a HP BL C3000 enclosure?
What needs to be set, updated etc.

Thanks.

-inex

marcus1234 — Wed, 09 Dec 2009 22:49:26 GMT

hmmm ..inex select Os and proceed

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3664326&taskId=135&prodTypeId=329290&prodSeriesId=3188465〈=en&cc=us&submit=Go%20%C2%BB

and follow these matrixes

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=3540808&prodTypeId=329290&objectID=c01894379

, firmware update order is blades sysboard , then its ilo , then all connects , last the OA. then reseat the oa ,

then go in to OA on left click on rack firmware ensure all firmwares are taken and similar,

now install os on blades

then update blades with lates proliant support packs currently 8.3

enjoy:)

This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

marcus1234 — Wed, 09 Dec 2009 22:50:46 GMT

marcus1234 — Wed, 09 Dec 2009 23:04:54 GMT

then this more details it the setup guide but not the quick one read this after skimming over the first one ,

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01167165/c01167165.pdf