topic How to check CPU? in BladeSystem - General

How to check CPU?

samrutia — Tue, 19 Jan 2010 06:04:25 GMT

Hi all,

How to check CPU status?

Find attached MP log, let me know weather CPU 0 is failed or not.

Kindly let me know how to analyze the MP logs?

Regards,
Sandeep.

Re: How to check CPU?

samrutia — Tue, 19 Jan 2010 06:32:39 GMT

Hi,

Server is BL860c.
O.S. HP UX 11.31

Thanks in Advance,
Sandeep

Re: How to check CPU?

Michal Kapalka (mikap) — Tue, 19 Jan 2010 09:45:45 GMT

hi,
if teh server is up and running you could check the number of cpu with

machinfo

mikap

Re: How to check CPU?

kris rombauts — Wed, 20 Jan 2010 09:21:07 GMT

Hi Sandeep,

CPU 0 seems to have an issue with it's voltage regulator and seems to have shut down the server blade several times as can be seen in the MP log file.

I suggest to replace the CPU 0 Montvale processor module.
Both CPU's are fully recognized at boot time every time but after a while the blade shuts down due to the voltage regulator issue in CPU 0.

44 BMC *5 0x204B52A541020430 FFFF0307D0020300 VOLTAGE_DEGRADES_TO_NON_RECOVERABLE
17 Jan 2010 05:50:57
45 BMC *7 0x204B52A541020440 D000A870D0120300 SHUTDOWN_OR_RESET_ON_SENSOR
17 Jan 2010 05:50:57

HTH

Kris