https://community.hpe.com/t5/bladesystem-general/bl460-g1-second-processor-option/m-p/4568060#M8972 <!--!*#-->After installing the 2nd processor, the server will not boot. The power button light remains amber, and all of the other LEDs are off.<BR /><BR />OA shows the server as being turned off, and when I attempt to power on, it shows on, then immediately turns off. <BR /><BR />If I remove the 2nd processor the server powers on, and boots just fine. I have tried multiple kits, and all of the processors work in single config, but the server will not power on with any combination of the two.<BR /><BR />Firmware:<BR />ILO is latest, System ROM is latest, Power Management Controller is latest. Not sure what else could be causing this. I have 2 other identical blades running dual CPU configs just fine in the same C3000 enclosure. Wed, 20 Jan 2010 21:08:33 GMT Kelly Spoonemore 2010-01-20T21:08:33Z https://community.hpe.com/t5/bladesystem-general/bl460-g1-second-processor-option/m-p/4568060#M8972 <!--!*#-->After installing the 2nd processor, the server will not boot. The power button light remains amber, and all of the other LEDs are off.<BR /><BR />OA shows the server as being turned off, and when I attempt to power on, it shows on, then immediately turns off. <BR /><BR />If I remove the 2nd processor the server powers on, and boots just fine. I have tried multiple kits, and all of the processors work in single config, but the server will not power on with any combination of the two.<BR /><BR />Firmware:<BR />ILO is latest, System ROM is latest, Power Management Controller is latest. Not sure what else could be causing this. I have 2 other identical blades running dual CPU configs just fine in the same C3000 enclosure. Wed, 20 Jan 2010 21:08:33 GMT https://community.hpe.com/t5/bladesystem-general/bl460-g1-second-processor-option/m-p/4568060#M8972 Kelly Spoonemore 2010-01-20T21:08:33Z https://community.hpe.com/t5/bladesystem-general/bl460-g1-second-processor-option/m-p/4568061#M8973 move second processor to firsttslot <BR />does it boot with this one alon if so now add the other what happens could just be a stepping issue <BR /><BR />This is how we thank each other in the forum<BR /><BR /><A href="http://forums11.itrc.hp.com/service/forums/helptips.do?#33" target="_blank">http://forums11.itrc.hp.com/service/forums/helptips.do?#33</A><BR /><BR />Enjoy:) Thu, 21 Jan 2010 21:42:03 GMT https://community.hpe.com/t5/bladesystem-general/bl460-g1-second-processor-option/m-p/4568061#M8973 marcus1234 2010-01-21T21:42:03Z