https://community.hpe.com/t5/bladesystem-general/bl3000-hw-configuration/m-p/4574832#M9102 I have two bl280c G6 blades (bays 3 and 7) that will not power up. the OA shows an error - "partner device not found". They both have P700 controllers and I have an MDS600 attached.<BR /><BR />TIA<BR /><BR />Mark Sun, 31 Jan 2010 19:16:58 GMT tbslim 2010-01-31T19:16:58Z https://community.hpe.com/t5/bladesystem-general/bl3000-hw-configuration/m-p/4574832#M9102 I have two bl280c G6 blades (bays 3 and 7) that will not power up. the OA shows an error - "partner device not found". They both have P700 controllers and I have an MDS600 attached.<BR /><BR />TIA<BR /><BR />Mark Sun, 31 Jan 2010 19:16:58 GMT https://community.hpe.com/t5/bladesystem-general/bl3000-hw-configuration/m-p/4574832#M9102 tbslim 2010-01-31T19:16:58Z