https://community.hpe.com/t5/bladesystem-general/push-firmware-update/m-p/4578004#M9155 Hi,<BR /><BR />Does anyone know if it's possible to push firmware updates to a bunch of blades at once?<BR /><BR />We have 14enclosures with each 16blades installed. So it would be a lot of work bringing them all down and booting from the firmware-cd.<BR /><BR />Is there any other way of updating for example the power management controller firmware on more than one blade at a time, even if this blade has no OS installed?<BR /><BR />Thanks. Thu, 04 Feb 2010 09:40:56 GMT sdb_2 2010-02-04T09:40:56Z https://community.hpe.com/t5/bladesystem-general/push-firmware-update/m-p/4578004#M9155 Hi,<BR /><BR />Does anyone know if it's possible to push firmware updates to a bunch of blades at once?<BR /><BR />We have 14enclosures with each 16blades installed. So it would be a lot of work bringing them all down and booting from the firmware-cd.<BR /><BR />Is there any other way of updating for example the power management controller firmware on more than one blade at a time, even if this blade has no OS installed?<BR /><BR />Thanks. Thu, 04 Feb 2010 09:40:56 GMT https://community.hpe.com/t5/bladesystem-general/push-firmware-update/m-p/4578004#M9155 sdb_2 2010-02-04T09:40:56Z https://community.hpe.com/t5/bladesystem-general/push-firmware-update/m-p/4578005#M9156 Check HP SUM. You can find from fw cds Thu, 04 Feb 2010 17:17:24 GMT https://community.hpe.com/t5/bladesystem-general/push-firmware-update/m-p/4578005#M9156 JKytsi 2010-02-04T17:17:24Z