https://community.hpe.com/t5/bladesystem-general/debian-driver/m-p/4581852#M9207 Hi... <BR />I have a Blade system C7000 enclosure G2, with 4 HP Proliant BL 460C G6 blades and a HP VC Flex-10 enet module... <BR /><BR />when I install debian lenny it not find the network interfaces (nic's) where and can find de drivers?? Wed, 10 Feb 2010 23:56:33 GMT Mauricio Estacio 2010-02-10T23:56:33Z https://community.hpe.com/t5/bladesystem-general/debian-driver/m-p/4581852#M9207 Hi... <BR />I have a Blade system C7000 enclosure G2, with 4 HP Proliant BL 460C G6 blades and a HP VC Flex-10 enet module... <BR /><BR />when I install debian lenny it not find the network interfaces (nic's) where and can find de drivers?? Wed, 10 Feb 2010 23:56:33 GMT https://community.hpe.com/t5/bladesystem-general/debian-driver/m-p/4581852#M9207 Mauricio Estacio 2010-02-10T23:56:33Z https://community.hpe.com/t5/bladesystem-general/debian-driver/m-p/4581853#M9208 <A href="http://www.hp.com" target="_blank">http://www.hp.com</A> --&gt; Support &amp; Drivers then follow down by putting in your server model and to select the OS. Thu, 11 Feb 2010 00:51:16 GMT https://community.hpe.com/t5/bladesystem-general/debian-driver/m-p/4581853#M9208 David Claypool 2010-02-11T00:51:16Z https://community.hpe.com/t5/bladesystem-general/debian-driver/m-p/4581854#M9209 The BL460 G6 blade uses a NIC (NC532i - based on a Broadcom BCM 57711E chip) that uses the bnx2x driver. That NIC/driver does not use open-source firmware, which means the firmware is in Debian non-free land and not part of the lenny install media. HP's Dann Frazier (aka dannf) has a script that can be used to insert the non-free firmware into the Lenny install ISO. The script is caled "add-firmware-to" and a web search for that should find the link on people.debian.org. Fri, 12 Feb 2010 00:54:36 GMT https://community.hpe.com/t5/bladesystem-general/debian-driver/m-p/4581854#M9209 rick jones 2010-02-12T00:54:36Z