topic Configuring heartbeat between 2 BL460c blades within same enclosure in BladeSystem - General

Configuring heartbeat between 2 BL460c blades within same enclosure

Aamir Majeed — Mon, 29 Mar 2010 09:59:32 GMT

Hi,

I have two blades BL460c installed in same enclosures, and I have 2 GBE2 switches installed at back of enclosure. Due to clustering environment I want to configure heartbeat between these 2 servers. whether external cross over cable will be required or we can use switch's internal ports.

Re: Configuring heartbeat between 2 BL460c blades within same enclosure

Michal Kapalka (mikap) — Mon, 29 Mar 2010 10:48:03 GMT

hi,

you culd check this threads from ITRC :

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1269863008235+28353475&threadId=1363453

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1269862778070+28353475&threadId=1249511

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1269862820889+28353475&threadId=1363453

mikap