https://community.hpe.com/t5/imc/imc-network-drops/m-p/6423916#M1179 IMC might be able to help. It depends:What exactly is happening when you have a "network drop" ? Are you seeing links flap? IGP/BGP state change? Or are you just seeing some remote sites become unreachable?<BR /><BR />If you're monitoring devices at the remote sites, then if it's an extended outage, IMC should be reporting that those sites are unavailable. But this will depend a bit on your polling cycles, and the length of the outage - e.g. if it's a 2-second outage, you're almost certainly not going to see any IMC alarms, since it probably won't poll at that exact time, and if it does, it will retry if the first poll fails.<BR /> Tue, 25 Mar 2014 08:27:54 GMT LindsayHill 2014-03-25T08:27:54Z https://community.hpe.com/t5/imc/imc-network-drops/m-p/6423446#M1178 <P>Recently we’ve been having random network drops in our environment. These drops happen periodically and will evenly go away. The drops are affecting 3 locations. We are running IMC 7.0 however IMC is not showing any alarms. Is there any way we can setup IMC to monitor for drops?</P> Mon, 24 Mar 2014 21:05:28 GMT https://community.hpe.com/t5/imc/imc-network-drops/m-p/6423446#M1178 rob misz 2014-03-24T21:05:28Z https://community.hpe.com/t5/imc/imc-network-drops/m-p/6423916#M1179 IMC might be able to help. It depends:What exactly is happening when you have a "network drop" ? Are you seeing links flap? IGP/BGP state change? Or are you just seeing some remote sites become unreachable?<BR /><BR />If you're monitoring devices at the remote sites, then if it's an extended outage, IMC should be reporting that those sites are unavailable. But this will depend a bit on your polling cycles, and the length of the outage - e.g. if it's a 2-second outage, you're almost certainly not going to see any IMC alarms, since it probably won't poll at that exact time, and if it does, it will retry if the first poll fails.<BR /> Tue, 25 Mar 2014 08:27:54 GMT https://community.hpe.com/t5/imc/imc-network-drops/m-p/6423916#M1179 LindsayHill 2014-03-25T08:27:54Z https://community.hpe.com/t5/imc/imc-network-drops/m-p/6438568#M1189 <P>For IMC it would be great to have the possibility to monitor layer 2 and layer 3 topologies (unicast, multicast, specific routing protocols, e.g. monitoring OSPF LSDB), spanning tree topologies, ...</P> Sun, 06 Apr 2014 19:26:33 GMT https://community.hpe.com/t5/imc/imc-network-drops/m-p/6438568#M1189 MichaelM55 2014-04-06T19:26:33Z