topic Re: Help with IMC and switch privilege-mode in IMC

Help with IMC and switch privilege-mode

MohammadH — Mon, 14 Apr 2014 05:44:09 GMT

Hello

I want create user in imc for access the switch and set every user privilege level like some user only fiest level operator level and some operator level and i choose some coomd for the user to use and user with full access admin

my question is what the best Module in the IMC for this ?

1- User Access Management Module

2- TACACS+ Authentication Manager

thank you

Re: Help with IMC and switch privilege-mode

Thunder_China — Tue, 15 Apr 2014 01:56:08 GMT

TACACS+ is the right component that you should configure.

Re: Help with IMC and switch privilege-mode

MohammadH — Tue, 15 Apr 2014 04:54:58 GMT

Hello Thunder_China

thank you for replay

can i do the configure i want in User Access Management Module ? the same in TACACS+ or not ?

thank you

Re: Help with IMC and switch privilege-mode

Thunder_China — Tue, 15 Apr 2014 07:54:30 GMT

UAM component focuses on how PC client accesses the network, and TAM(TACACS+ Authentication Manager) component focuses on what commands the user (telnet or ssh) can execute after login the device.

Re: Help with IMC and switch privilege-mode

MohammadH — Wed, 16 Apr 2014 10:58:15 GMT

Hello Thunder_China

so if i need to focuses on what commands the user use example (show vlan or sh ip ...) or which level (operator or manager) i need TAM(TACACS+ Authentication Manager ?!!

Thank you

Re: Help with IMC and switch privilege-mode

Thunder_China — Wed, 16 Apr 2014 11:23:31 GMT

Sorry, I am not very familar with TAM component, but I guess both of commands and level are supported.