topic Re: Imc Basic and Stack members in IMC

Imc Basic and Stack members

dyardley — Fri, 15 May 2015 15:18:20 GMT

When I run the discovery tool It finds the comander in the stack but does not show any of it memebers. When I view the device in topology mode it shows no stack member or anything. Is this a limitation of the basic software?

Re: Imc Basic and Stack members

Vince-Whirlwind — Mon, 18 May 2015 00:47:47 GMT

What switch model are we talking about here?

Re: Imc Basic and Stack members

dyardley — Tue, 26 May 2015 13:31:35 GMT

Hp 2910

Re: Imc Basic and Stack members

KrisseZ — Thu, 23 Jul 2015 12:20:24 GMT

Try the device details page and from there choose the network assets tab. That shows the stack members at least for the HP A-series switches. We have the basic version of IMC (JG747AAE) with the latest patch iMC PLAT 7.1 (E0303P13)

1 HP A5120-48G SI Switch HP A5120-48G SI Switch(Master) S/N number 1 REV.A 5.20 Release 1513P62 163

2 HP A5120-48G SI Switch HP A5120-48G SI Switch(Standby) S/N number 2 REV.A 5.20 Release 1513P62 163

Like so.

Hope this helps.