https://community.hpe.com/t5/imc/custom-snmp-formula-convert-c-to-f/m-p/6818512#M2417 <P>Ah, life would be a lot easier if everyone used standard units, wouldn't it?</P><P>I think the problem here is that IMC is treating 1.8 as an OID value.&nbsp;If that is the case, you'll see IMC attempting to poll the test device for a couple of OIDs, including the&nbsp;temperature OID, and 1.8. The device will of course respond with noSuchObject.</P><P>You might need to try doing something like Temp * 9/5 + 32.</P> Tue, 15 Dec 2015 03:15:15 GMT LindsayHill 2015-12-15T03:15:15Z https://community.hpe.com/t5/imc/custom-snmp-formula-convert-c-to-f/m-p/6818309#M2414 <P>Greetings.</P><P>I'm new to IMC. I have a custom SNMP index to pull chassis temp for various devices and of course returns a Celsius reading. I'm attempting to create a formula to convert it to Fahrenheit but am having troubles.</P><P>I copied the existing monitor that is working and used the following formula, but it doesn't work. I've also tried enclosing the OIDs in their own parentheses and a few other variations.</P><P><SPAN>(1.3.6.1.4.1.9.9.13.1.3.1.3*1.8)+32</SPAN></P><P>What am I doing wrong?</P><P>&nbsp;</P> Mon, 14 Dec 2015 14:37:12 GMT https://community.hpe.com/t5/imc/custom-snmp-formula-convert-c-to-f/m-p/6818309#M2414 Net-Dude 2015-12-14T14:37:12Z https://community.hpe.com/t5/imc/custom-snmp-formula-convert-c-to-f/m-p/6818512#M2417 <P>Ah, life would be a lot easier if everyone used standard units, wouldn't it?</P><P>I think the problem here is that IMC is treating 1.8 as an OID value.&nbsp;If that is the case, you'll see IMC attempting to poll the test device for a couple of OIDs, including the&nbsp;temperature OID, and 1.8. The device will of course respond with noSuchObject.</P><P>You might need to try doing something like Temp * 9/5 + 32.</P> Tue, 15 Dec 2015 03:15:15 GMT https://community.hpe.com/t5/imc/custom-snmp-formula-convert-c-to-f/m-p/6818512#M2417 LindsayHill 2015-12-15T03:15:15Z