topic Re: Topology Map links in IMC

Topology Map links

Mbaadk — Tue, 03 May 2016 09:10:57 GMT

Hi all...

Is it possible to keep inactive links present on the topology map, after they have been disconnected.

We have a hugh STP ring on ring topology, and when a fiber link goes down, it's easier for operations to look at the topology map to see where the issue is.

Michael

Re: Topology Map links

NeilR — Thu, 05 May 2016 00:45:20 GMT

these settings might possibly help you:

System > System Settings > Layer 2 Topology Configuration (midway down the page)

Re: Topology Map links

johnk3r — Thu, 12 May 2016 15:10:39 GMT

I have the same question.

How to display the blocked ports by STP innetwork topology.

Re: Topology Map links

rafter_1 — Fri, 13 May 2016 14:06:10 GMT

If there is a "loop" usually iMC draws a little circle at the top of the switch icon - get rid of the loop/block and the icon changes (after a sync). I'd also be interesed how to alert on this instead though...