https://community.hpe.com/t5/imc/if-then-condition-in-imc/m-p/6949137#M3657 <P>the intelligent policy center under services should allow you to do that if you can detect it from a trap.</P><P>IMC generates some traps as well that might be used..</P><P>Once an event is detected, you can execute a check task (among other actions) - see compliance center - &nbsp;which can then push commands to a switch</P> Fri, 17 Mar 2017 17:02:53 GMT NeilR 2017-03-17T17:02:53Z https://community.hpe.com/t5/imc/if-then-condition-in-imc/m-p/6949026#M3652 <P>Just wondered if possible to set this in IMC</P><P>IF device A connected to a switch stops responding to pings THEN push preconfigured script to that switch</P> Fri, 17 Mar 2017 11:48:19 GMT https://community.hpe.com/t5/imc/if-then-condition-in-imc/m-p/6949026#M3652 pattap 2017-03-17T11:48:19Z https://community.hpe.com/t5/imc/if-then-condition-in-imc/m-p/6949137#M3657 <P>the intelligent policy center under services should allow you to do that if you can detect it from a trap.</P><P>IMC generates some traps as well that might be used..</P><P>Once an event is detected, you can execute a check task (among other actions) - see compliance center - &nbsp;which can then push commands to a switch</P> Fri, 17 Mar 2017 17:02:53 GMT https://community.hpe.com/t5/imc/if-then-condition-in-imc/m-p/6949137#M3657 NeilR 2017-03-17T17:02:53Z