https://community.hpe.com/t5/imc/loop-protection-batch-operation/m-p/6980834#M4126 <P>Hi,</P><P>I want to enable Loop Protection on a per port base on several switches by a batch operation. I only want the access ports to be protected and not the uplinks between the switches.</P><P>All access ports are labeled "ACCESS" and all uplink ports are labeled "UPLINK" . I created two port groups in iMC (Access and Uplink).</P><P>Is it possible to create a batch operation using the port group "Access" to enable loop protection only on the access ports?</P> Mon, 23 Oct 2017 14:53:14 GMT fpr 2017-10-23T14:53:14Z https://community.hpe.com/t5/imc/loop-protection-batch-operation/m-p/6980834#M4126 <P>Hi,</P><P>I want to enable Loop Protection on a per port base on several switches by a batch operation. I only want the access ports to be protected and not the uplinks between the switches.</P><P>All access ports are labeled "ACCESS" and all uplink ports are labeled "UPLINK" . I created two port groups in iMC (Access and Uplink).</P><P>Is it possible to create a batch operation using the port group "Access" to enable loop protection only on the access ports?</P> Mon, 23 Oct 2017 14:53:14 GMT https://community.hpe.com/t5/imc/loop-protection-batch-operation/m-p/6980834#M4126 fpr 2017-10-23T14:53:14Z https://community.hpe.com/t5/imc/loop-protection-batch-operation/m-p/6981057#M4133 <P>Not yet. The options which are availabe to configure a port, are very simple, Loop Protection isn't in it. I think the only way to do so, is a configuration template where you define the port no/port range as a variable, so that you can change between different modells.</P> Wed, 25 Oct 2017 12:07:00 GMT https://community.hpe.com/t5/imc/loop-protection-batch-operation/m-p/6981057#M4133 ibias 2017-10-25T12:07:00Z