Zero Touch Provisioning with iMC

MaxWagner — Fri, 12 Jan 2018 13:55:16 GMT

I am new to iMC and I try to find a way to automate the initial switch configuration. I found a guide which uses two config files for the Zero Touch Provisioning. (See here: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA6-1335ENW.pdf)

After completing all configuration steps in iMC, the switch is booting up, receives the first config file from iMC (via DHCP settings) and load all settings correctly. After that you should see the Auto Deployment task in iMC "Beeing Executed", but it's still "Not Executed". iMC does not recognize the switch, otherwise the switch should reboot and receive the secound configuration. I checked all settings twice without success.

Do you have any ideas why it does not work?

I am testing with a HPE 5130.

Best regards,

Max

Re: Zero Touch Provisioning with iMC

ibias1 — Tue, 16 Jan 2018 13:44:18 GMT

Did you checked it on the switch itself? Connect a serial cable and see if the switch boot which information comes in. The final IP of the switch could be reached from the imc server?

Re: Zero Touch Provisioning with iMC

C0LdWir3 — Thu, 04 Mar 2021 15:29:54 GMT

Did you manage to solve this issue ?

topic Zero Touch Provisioning with iMC in IMC

Zero Touch Provisioning with iMC

Re: Zero Touch Provisioning with iMC

Re: Zero Touch Provisioning with iMC