topic Re: NTA 7.3 Interface Traffic Analysis Task in IMC

NTA 7.3 Interface Traffic Analysis Task

LOLOYR — Tue, 13 Feb 2018 17:55:05 GMT

Hello

When creating "Interface Traffic Analysis Task" with a scpecific user account on IMC, the other user that able to connect to IMC didn't see this Task. Even if a task is done with the admin account, the other admin user no able to see that task. Is it a bug in version 7.3, it was not a problem in previous version 7.1 ?

Re: NTA 7.3 Interface Traffic Analysis Task

NeilR — Tue, 13 Feb 2018 19:18:47 GMT

Make sure you have a reader group specified that everyone reading is a member of

Re: NTA 7.3 Interface Traffic Analysis Task

LOLOYR — Wed, 14 Feb 2018 16:18:38 GMT

Hello Neil,

The group you specified, is interface group, user group, or Operator group.

Thanks for your help

Re: NTA 7.3 Interface Traffic Analysis Task

NeilR — Thu, 15 Feb 2018 01:13:48 GMT

The reader group(s) for an analysis task are selected from the System/Operator Groups. See screen shots attached.

After you create operators under System, assign them to one of the pre-defined groups (admin, maintainer, viewer) which have rights in the various modules.

You can copy one and modify it to your needs. If the group has rights to the module, in this case NTA, then you can select them and add to the analysis task you created. If they don't have the rights then they would not be in the pick list.

Re: NTA 7.3 Interface Traffic Analysis Task

LOLOYR — Thu, 15 Feb 2018 13:12:27 GMT

Thank you very much Neil for your support