topic Re: Hardware monitoring in IMC

Hardware monitoring

agmk — Fri, 13 Apr 2018 12:43:58 GMT

how to configure HPE IMC to monitor SW modules and power supply, POE fault errors.

On SWs are configured SNMPv3

Re: Hardware monitoring

SantoshPG — Fri, 13 Apr 2018 20:54:49 GMT

Hi,
You will need to enable traps on the device and configure IMC as a trap receiver . The POE, PSU failure alarms etc are sent as traps to IMC from the device.

Re: Hardware monitoring

agmk — Mon, 16 Apr 2018 12:47:34 GMT

can you please provide some example let say for SW 5406Rzl2 J9850A and IMC version 7.2

i was trying to configure on IMC syslog templates, buti thing this thing depends on severity on devices.

Re: Hardware monitoring

LindsayHill — Mon, 16 Apr 2018 19:43:02 GMT

IMC should already have the trap configurations in place on the server side, for HPE switches. You just need to add the trap destinations to the switches.