https://community.hpe.com/t5/imc/cli-script-for-switch-dell-powerconnect5548/m-p/7004441#M4492 <P>Hi,</P><P>My end custumer have a lot of switch DELL PowerConnect5548, and he want use "CLI Script" for change some configuration paramètre.</P><P>I have create a Scritp:</P><P style="padding-left: 30px;">conf t</P><P style="padding-left: 30px;">ntp server 1.1.1.1</P><P>But when i activate the Script, i have a issue because, i must use SSH and with this type of switch, the switch send a first prompt "login as:" (we can write anything) and after the switch prompt "username" and "password".</P><P>how i can bypass "login as"?</P> Wed, 02 May 2018 14:17:51 GMT spag 2018-05-02T14:17:51Z https://community.hpe.com/t5/imc/cli-script-for-switch-dell-powerconnect5548/m-p/7004441#M4492 <P>Hi,</P><P>My end custumer have a lot of switch DELL PowerConnect5548, and he want use "CLI Script" for change some configuration paramètre.</P><P>I have create a Scritp:</P><P style="padding-left: 30px;">conf t</P><P style="padding-left: 30px;">ntp server 1.1.1.1</P><P>But when i activate the Script, i have a issue because, i must use SSH and with this type of switch, the switch send a first prompt "login as:" (we can write anything) and after the switch prompt "username" and "password".</P><P>how i can bypass "login as"?</P> Wed, 02 May 2018 14:17:51 GMT https://community.hpe.com/t5/imc/cli-script-for-switch-dell-powerconnect5548/m-p/7004441#M4492 spag 2018-05-02T14:17:51Z