HP IMC Performance Global Index and Eaton SNMP tables with multiple instances

Eli_at_Decom — Fri, 21 May 2021 20:21:23 GMT

Hello

Need an advice how to configure HP IMC Performance Global Index with Eaton SNMP tables with multiple instances. Tried:

ePDU groupWatts
[index1[2]:groupPowerTable:1:0].[index2[2]:groupPowerEntry:1:0].[index3[2]:groupWatts:1:0]
1.3.6.1.4.1.534.6.6.7.5.5.1.3

and IMC failed to recognize instance

from SNMP Browser:

***** SNMP GET REQUEST STARTED *****
1) 1.3.6.1.4.1.534.6.6.7.5.5.1.3.0.2 (groupWatts.0.2) 1413
***** SNMP GET REQUEST FINISHED *****
***** SNMP GET REQUEST STARTED *****
1) 1.3.6.1.4.1.534.6.6.7.5.5.1.3.0.1 (groupWatts.0.1) 2405
***** SNMP GET REQUEST FINISHED *****

Thank you

Re: HP IMC Performance Global Index and Eaton SNMP tables with multiple instances

Eli_at_Decom — Sun, 23 May 2021 15:19:49 GMT

Hello,

It works, if defined in following way:

ePDU groupWatts

[index1[0]:groupWatts:1:0]

1.3.6.1.4.1.534.6.6.7.5.5.1.3.0

topic HP IMC Performance Global Index and Eaton SNMP tables with multiple instances in IMC

HP IMC Performance Global Index and Eaton SNMP tables with multiple instances

Re: HP IMC Performance Global Index and Eaton SNMP tables with multiple instances