topic Re: Alerts with IMC 5.2 in IMC

Alerts with IMC 5.2

aali — Tue, 07 May 2013 18:10:40 GMT

I keep getting alerts that a port is down or goes down. can someone direct me to where I can turn this off for all ports, then how to turn it on for select ports?

Re: Alerts with IMC 5.2

LindsayHill — Tue, 07 May 2013 21:26:42 GMT

System -> System Configuration -> System Settings. Find "Interface Up/Down Alarm". Set all of those to Filter.

To override it on a per-interface basis, find the Interface Details page for the interface you're interested in. Go to Up/Down Alarm Filter. Set it to No Filter.

Take a look through some of the youtube videos on using IMC - I think this is covered in there: youtube.com/theimcmanagement

Re: Alerts with IMC 5.2

aali — Tue, 07 May 2013 21:38:44 GMT

Thank You!

One more thing. I was playing with widgets under IMC home page and now everything is screwed up. Is it possible to revert back to default IMC home page?

Regards,

Re: Alerts with IMC 5.2

LindsayHill — Tue, 07 May 2013 21:47:18 GMT

Off the top of my head, I don't think so. You could create a new user, and take a look at the way their default homepage is setup.

Re: Alerts with IMC 5.2

aali — Tue, 07 May 2013 22:58:35 GMT

Thanks!

I run the Auto Discovery on our network and was wondering how to customize to focus on switches eliminating a lot of desktops. It reported 300+ devices and most of them are desktops, and laptops.

Any recommendation on that.

Thanks

Re: Alerts with IMC 5.2

LindsayHill — Tue, 07 May 2013 23:19:30 GMT

Play around with your auto-discover settings. Don't include non-SNMP devices.