topic PCM+ 3 remote client access to PCM+ server installed on window server 2008 R2 in PCM

PCM+ 3 remote client access to PCM+ server installed on window server 2008 R2

wayne21 — Tue, 16 Aug 2011 08:11:40 GMT

I have installed PCM+ on this server and able to connect to it. I have opend port 8040 on there windows server to be able to down load the client and install it. The client installed fine but can not fine the server. If i diable the fire wall on the windows server the client find the server an i am able to log on. If i actuvate the firewall the client can not find the server. Looks like i need to open ectra ports on the windows 2008 firewall.

Re: PCM+ 3 remote client access to PCM+ server installed on window server 2008 R2

svbritt — Wed, 17 Aug 2011 16:34:33 GMT

Hi,

It sounds likeyou need to configure inbound rules for the PCM server in your Windows firewall. Try adding a program rule that allows connections for the hp_pcm_jre\bin\javaw.exe file located under the PCM installation directory, and make sure the rule applies to all profiles.

Regards,

SVB