topic PCM V 3 + traffic monitoring Problems in PCM

PCM V 3 + traffic monitoring Problems

mlouhab — Tue, 23 Aug 2011 17:51:11 GMT

Hi ,

We have just installed PCM 3 plus , and We have added more then 50 Switches HP Procvrue.

all HP 2500 and HP 2600 Switches work well and we are able to see the traffic statistics.

BUT HP 2800 Switches and 9300 Switch still waiting for data ( the LED is gray).

For HP 2800 Switches i had 30 Switch (4 Swithes working fine i can see traffic statistics but the rest no !!!!)

all Credentials ( the SNMP settings and the CLI settings) are match in all swtches.

For sflow i torn off my firewall for allowed swflow traffic , but no working :(((((

what's wrong??

Thank

Re: PCM V 3 + traffic monitoring Problems

mhouba — Wed, 24 Aug 2011 11:36:52 GMT

Re: PCM V 3 + traffic monitoring Problems

mlouhab — Wed, 24 Aug 2011 11:44:00 GMT

when i do show sflow dest in switchs HP 2800
i I saw that the destination addresse is 169.x.x.X , this address in not routed. i disabled this address from my card network. i rebbot my HP Procuvre. and now is working