https://community.hpe.com/t5/pcm/pcm-all-device-unreachable/m-p/6665444#M719 <P>From the PC that PCM is installed, bring up a command line, can you ping a remote switch? Can you telnet to a remote switch?</P> Thu, 06 Nov 2014 05:54:48 GMT Vince-Whirlwind 2014-11-06T05:54:48Z https://community.hpe.com/t5/pcm/pcm-all-device-unreachable/m-p/6665442#M718 <P>PCM+ shows all devices ( procurve switches) is unreachable.. No issue on network connectivy being reported.. just this pc where PCM+ is installed shows all monitored devices unreachable.. Any troubleshooting idea is much appreciated.. Have tried to change network cards.. even worse cant even go into pcm program.. Now PCM+ is connected via original network card and I can logon to PCM+ but all switches is still unreachable.. Thank You</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from ProCurve / ProVision-Based to Network Management &gt; PCM. -HP Forum Moderator</P> Mon, 10 Nov 2014 04:13:32 GMT https://community.hpe.com/t5/pcm/pcm-all-device-unreachable/m-p/6665442#M718 Fayzal-Grey 2014-11-10T04:13:32Z https://community.hpe.com/t5/pcm/pcm-all-device-unreachable/m-p/6665444#M719 <P>From the PC that PCM is installed, bring up a command line, can you ping a remote switch? Can you telnet to a remote switch?</P> Thu, 06 Nov 2014 05:54:48 GMT https://community.hpe.com/t5/pcm/pcm-all-device-unreachable/m-p/6665444#M719 Vince-Whirlwind 2014-11-06T05:54:48Z