HP ProCurve Manager

Niklas Andersson — Mon, 24 Nov 2014 02:47:09 GMT

I have trouble installing Procurve Manager. I downloaded the newest version from hp.com and I have successfully installed it on a workstation with Win XP but when I try to install it on a Windows Server 2003 I only come as far as to the part where it tries to start the services. Then it says I should make shure I have sufficient previliges. I'm logged on as the local Administrator so I can't think that is the problem.
Ive tried on two different Servers, so I don't believe it's the hardware either.
The latest server is a newly installed 2003, I even patched it up with everything MS got to se if that would solve it, but had no luck.
I really want to be able to centrally manage my new HP Switches (HP4108GL & HP2524) so any help would be appreciated!

P.S. This thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to PCM. - Hp Forum Moderator

Re: HP ProCurve Manager

Mohamed Hamedi — Wed, 17 Dec 2003 12:49:26 GMT

Can you please tell me what is the numerical error code that appears with the message.

Re: HP ProCurve Manager

Niklas Andersson — Thu, 18 Dec 2003 02:08:42 GMT

The error I get is as follows:

Error 1920. Service HP Procurve Network Manager Server (HP Procurve Network Manager Server) failed to start. Verify that you have sufficient privileges to start system services.

topic HP ProCurve Manager in PCM

HP ProCurve Manager

Re: HP ProCurve Manager

Re: HP ProCurve Manager