topic Re: Comware emulator in Network Simulator

Comware emulator

Scott Micale — Mon, 22 Sep 2014 14:13:31 GMT

Is this Comware Emulator work for HP ProCurve Switches? Looking for a tool that I can test on instead of my production equipment.

Thanks,

-Scott

Re: Comware emulator

Andrew Pearce — Wed, 24 Sep 2014 13:09:11 GMT

Scott,

This emulator is based on our Comware operating system.

Some of our later provision switches have comware compatible cli.

So learning comware can help you support your provision switches.

Andrew

Re: Comware emulator

JDeMo — Tue, 28 Oct 2014 13:52:02 GMT

Does anyone know if this emulator provides ability to support not only the Procurve line, but the 3Com devices? Looking to find way to get NOC trained on the devices that in place from HP purchase of 3Com.

Thanks

Re: Comware emulator

Jay_Flora — Tue, 28 Oct 2014 19:18:39 GMT

Hi JDeMo,

All 3Com/H3C devices operate on the Comware OS, so this tool will be the best way to get the NOC trained on the 3Com devices.

Thanks,

Jay

Re: Comware emulator

JDeMo — Mon, 03 Nov 2014 20:52:40 GMT

Jay,

Thanks for the reply. You mentioned all HP is run on the comware, but how about the older, tradition procurve?

Thanks

Re: Comware emulator

Jay_Flora — Mon, 03 Nov 2014 21:06:24 GMT

Hi JDeMo,

All of HP is not run on Comware, all of the 3Com/H3C devices run on Comware.

The Procurve devices still use Procurve.

The HNS simlulator simulates only Comware, not Provision.

Thanks,

Jay