Error when running the simulator

toto174 — Sun, 02 Nov 2014 11:37:24 GMT

Hi,

I'm with GNU/Linux testing (jessie).

Kernel : 3.16-2-amd64

virtualbox 4.3.18-dfsg-1 amd64

HNS_7.1.50_x86_64.deb

I installed successful Virtualbox, HNS.

I run HNS and give a try with this config :

#device 1
device_id = 1
#device type is chassis
device_model = SIM1200
#host ip option 
#host_ip = 192.168.100.1
#board slot type and aux_port memory_size
board = SIM1201 : aux_port 51234
#device 2
device_id = 2
#device tyep is box
device_model = SIM1200
#board slot type and aux_port memory_size
board = SIM1201 : aux_port 51235
#connect two interface
device 1 : interface 2 <---> device 2 : interface 2

Then, i start the simulator but i got this error :

Failed to refresh comware version

Also, i gave a try to run it with sudo but it said that it can not to display on "10.0" to the X server.

X11 connection rejected because of wrong authentication.
HP Network Simulator: cannot connect to X server localhost:10.0

Althought i can display the "xclock" command from the terminal.

echo $DISPLAY said me that i'm ok.

I tried :

export DISPLAY="127.0.0.1:10.0"

But nothing.

So, please, do you have some feedback from installing and running on Linux ?

Thank you in advance for your return.

Re: Error when running the simulator

Jay_Flora — Tue, 04 Nov 2014 21:49:51 GMT

Hi toto174,

HNS is supported only on Windows and Ubuntu as of now. I ran your script with the same virtual box image on Ubuntu 14.04 and it ran perfectly fine after I removed the ": aux_port 51234" part from line 8 and 14.

I did not get any errors you've mentioned. It maybe because I used Ubuntu and you're using some other unsupported version of Linux.

Do you have Ubuntu with the same Virtual Box version?

Regards,

Jay

topic Error when running the simulator in Network Simulator

Error when running the simulator

Re: Error when running the simulator