MPLS-TE on H3C CLOUD LAB

Bosozoku — Mon, 04 Mar 2019 12:41:51 GMT

Hello,

First, i apologize for my english.

On the simulator i try to make a mpls-te tunnel like the exemple on the "HP MSR2000/3000/4000 router series MPLS configuration guide V7" on page 72 (Establishing an inter-AS MPLS TE tunnel with RSVP-TE).

My netwok is ok about OSPF and BGP. The ip routing table confirm that.

But when i configure the tunnel, the network i would to reach don't pass by the tunnel. On the Ip routing table is again learn by ospf

Did someone succed to doing a inter-AS MPLS-TE ?

Tanks

Re: MPLS-TE on H3C CLOUD LAB

jmpk — Mon, 25 Mar 2019 07:19:09 GMT

Hello ,

As per my undestanding ton your network the traffic should pass inside the tunnel -- Correct me if i am wrong . Can you please share us the configuration which you have made .

Thanks,

JMPK

Re: MPLS-TE on H3C CLOUD LAB

Bosozoku — Fri, 21 Jun 2019 09:24:32 GMT

first i apologize for the delay of my answer.

In the example given in the documentation wich a refer on my last message. My network has to pass trough the tunnel mpls-te to join another network.

Documentation here : https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02659399

<ROUTER A>di cu
#
version 7.1.075, Alpha 7571
#
sysname ROUTER A
#
ospf 1
area 0.0.0.0
network 1.1.1.9 0.0.0.0
network 10.1.1.0 0.0.0.255
mpls te enable
#
mpls lsr-id 1.1.1.9
#
system-working-mode standard
xbar load-single
password-recovery enable
lpu-type f-series
#
vlan 1
#
mpls ldp
lsr-id 1.1.1.9
#
mpls te
#
explicit-path atod
nexthop index 1 10.1.1.2 include loose
nexthop index 101 20.1.1.2 include loose
nexthop index 201 30.1.1.2 include loose
#
rsvp
#
interface Serial1/0
#
interface Serial2/0
#
interface Serial3/0
#
interface Serial4/0
#
interface NULL0
#
interface LoopBack0
ip address 1.1.1.9 255.255.255.255
#
interface GigabitEthernet0/0
port link-mode route
combo enable copper
#
interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 10.1.1.1 255.255.255.0
mpls enable
mpls ldp enable
mpls te enable
mpls te max-link-bandwidth 10000
mpls te max-reservable-bandwidth 5000
#
interface GigabitEthernet0/2
port link-mode route
combo enable copper
#
interface GigabitEthernet5/0
port link-mode route
combo enable copper
#
interface GigabitEthernet5/1
port link-mode route
combo enable copper
#
interface GigabitEthernet6/0
port link-mode route
combo enable copper
#
interface GigabitEthernet6/1
port link-mode route
combo enable copper
#
interface Tunnel1 mode mpls-te
ip address 7.1.1.1 255.255.255.0
mpls te bandwidth ct0 2000
mpls te path preference 5 explicit-path atod
destination 4.4.4.9
#
scheduler logfile size 16
#
line class aux
user-role network-operator
#
line class console
user-role network-admin
#
line class tty
user-role network-operator
#
line class vty
user-role network-operator
#
line aux 0
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 63
user-role network-operator
#
ip route-static 30.1.1.0 24 Tunnel1 preference 1
#
domain name system
#
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#
role name level-14
description Predefined level-14 role
#
user-group system
#
return

---------------------------------------------------------------------------------------------------

<ROUTER B>di cu
#
version 7.1.075, Alpha 7571
#
sysname ROUTER B
#
ospf 1
import-route direct
import-route bgp
area 0.0.0.0
network 2.2.2.9 0.0.0.0
network 10.1.1.0 0.0.0.255
mpls te enable
#
mpls lsr-id 2.2.2.9
#
system-working-mode standard
xbar load-single
password-recovery enable
lpu-type f-series
#
vlan 1
#
mpls ldp
lsr-id 2.2.2.9
#
mpls te
#
rsvp
#
interface Serial1/0
#
interface Serial2/0
#
interface Serial3/0
#
interface Serial4/0
#
interface NULL0
#
interface LoopBack0
ip address 2.2.2.9 255.255.255.255
#
interface GigabitEthernet0/0
port link-mode route
combo enable copper
#
interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 10.1.1.2 255.255.255.0
mpls enable
mpls ldp enable
mpls te enable
mpls te max-link-bandwidth 10000
mpls te max-reservable-bandwidth 5000
rsvp enable
#
interface GigabitEthernet0/2
port link-mode route
combo enable copper
#
interface GigabitEthernet5/0
port link-mode route
combo enable copper
ip address 20.1.1.1 255.255.255.0
mpls enable
mpls ldp enable
mpls te enable
mpls te max-link-bandwidth 10000
mpls te max-reservable-bandwidth 5000
rsvp enable
rsvp hello enable
#
interface GigabitEthernet5/1
port link-mode route
combo enable copper
#
interface GigabitEthernet6/0
port link-mode route
combo enable copper
#
interface GigabitEthernet6/1
port link-mode route
combo enable copper
#
bgp 100
peer 20.1.1.2 as-number 200
#
address-family ipv4 unicast
import-route direct
import-route ospf 1
peer 20.1.1.2 enable
#
scheduler logfile size 16
#
line class aux
user-role network-operator
#
line class console
user-role network-admin
#
line class tty
user-role network-operator
#
line class vty
user-role network-operator
#
line aux 0
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 63
user-role network-operator
#
domain name system
#
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#
role name level-14
description Predefined level-14 role
#
user-group system
#
return

------------------------------------------------------------------------

<ROUTER C>di cu
#
version 7.1.075, Alpha 7571
#
sysname ROUTER C
#
ospf 1
import-route direct
import-route bgp
area 0.0.0.0
network 3.3.3.9 0.0.0.0
network 30.1.1.0 0.0.0.255
mpls te enable
#
mpls lsr-id 3.3.3.9
#
system-working-mode standard
xbar load-single
password-recovery enable
lpu-type f-series
#
vlan 1
#
mpls ldp
lsr-id 3.3.3.9
#
mpls te
#
rsvp
#
interface Serial1/0
#
interface Serial2/0
#
interface Serial3/0
#
interface Serial4/0
#
interface NULL0
#
interface LoopBack0
ip address 3.3.3.9 255.255.255.255
#
interface GigabitEthernet0/0
port link-mode route
combo enable copper
#
interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 30.1.1.1 255.255.255.0
mpls enable
mpls ldp enable
mpls te enable
mpls te max-link-bandwidth 10000
mpls te max-reservable-bandwidth 5000
#
interface GigabitEthernet0/2
port link-mode route
combo enable copper
#
interface GigabitEthernet5/0
port link-mode route
combo enable copper
ip address 20.1.1.2 255.255.255.0
mpls enable
mpls ldp enable
mpls te enable
mpls te max-link-bandwidth 10000
mpls te max-reservable-bandwidth 5000
rsvp enable
#
interface GigabitEthernet5/1
port link-mode route
combo enable copper
#
interface GigabitEthernet6/0
port link-mode route
combo enable copper
#
interface GigabitEthernet6/1
port link-mode route
combo enable copper
#
bgp 200
peer 20.1.1.1 as-number 100
#
address-family ipv4 unicast
import-route direct
import-route ospf 1
peer 20.1.1.1 enable
#
scheduler logfile size 16
#
line class aux
user-role network-operator
#
line class console
user-role network-admin
#
line class tty
user-role network-operator
#
line class vty
user-role network-operator
#
line aux 0
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 63
user-role network-operator
#
domain name system
#
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#
role name level-14
description Predefined level-14 role
#
user-group system
#
return

------------------------------------------------------------------------

<ROUTER D>di cu
#
version 7.1.075, Alpha 7571
#
sysname ROUTER D
#
ospf 1
area 0.0.0.0
network 4.4.4.9 0.0.0.0
network 30.1.1.0 0.0.0.255
mpls te enable
#
mpls lsr-id 4.4.4.9
#
system-working-mode standard
xbar load-single
password-recovery enable
lpu-type f-series
#
vlan 1
#
mpls ldp
lsr-id 4.4.4.9
#
mpls te
#
rsvp
#
interface Serial1/0
#
interface Serial2/0
#
interface Serial3/0
#
interface Serial4/0
#
interface NULL0
#
interface LoopBack0
ip address 4.4.4.9 255.255.255.255
#
interface GigabitEthernet0/0
port link-mode route
combo enable copper
#
interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 30.1.1.2 255.255.255.0
mpls enable
mpls ldp enable
mpls te enable
mpls te max-link-bandwidth 10000
mpls te max-reservable-bandwidth 5000
rsvp enable
rsvp hello enable
#
interface GigabitEthernet0/2
port link-mode route
combo enable copper
#
interface GigabitEthernet5/0
port link-mode route
combo enable copper
rsvp hello enable
#
interface GigabitEthernet5/1
port link-mode route
combo enable copper
#
interface GigabitEthernet6/0
port link-mode route
combo enable copper
#
interface GigabitEthernet6/1
port link-mode route
combo enable copper
#
scheduler logfile size 16
#
line class aux
user-role network-operator
#
line class console
user-role network-admin
#
line class tty
user-role network-operator
#
line class vty
user-role network-operator
#
line aux 0
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 63
user-role network-operator
#
domain name system
#
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#
role name level-14
description Predefined level-14 role
#
user-group system
#
return

topic Re: MPLS-TE on H3C CLOUD LAB in Network Simulator

MPLS-TE on H3C CLOUD LAB

Re: MPLS-TE on H3C CLOUD LAB

Re: MPLS-TE on H3C CLOUD LAB