topic Re: About HP7510 settings in Network Simulator

About HP7510 settings

rodtor — Tue, 19 Oct 2021 10:15:41 GMT

Hello, I have two questions while using HP7510.
1. I wonder if the proxy arp setting is basically active.
2. I wonder if the tftp setting is basically active.
Thank you.

Re: About HP7510 settings

-Alex- — Tue, 19 Oct 2021 08:49:13 GMT

Hello rodtor,

1. Proxy arp is not enabled by default, you may check "display proxy-arp".

2. You may use TFTP by using the command "tftp":

tftp tftp-server { get | put | sget } source-filename [ destination-filename ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source { interface interface-type interface-number | ip source-ip-address } ] *

Hope this helps!

Re: About HP7510 settings

rodtor — Tue, 19 Oct 2021 10:14:40 GMT

Thank you for helping me. : )