topic Controller A rebooted after a network issue and shows as none on the array in HPE Nimble Storage Solution Specialists

Controller A rebooted after a network issue and shows as none on the array

zarnberg — Mon, 26 Aug 2024 03:59:24 GMT

The array sees the controller but and is able to pull fan speed and temp, but shows as unknown in the SSH console. We also have this log showing up every few minutes.

Configuration synchronization completed on array AF-210269
Array

Re: Controller A rebooted after a network issue and shows as none on the array

buzzsubash — Mon, 26 Aug 2024 03:12:24 GMT

Hello Zach,

I did notice that there were multiple restarts for controller A, and could be due to a hardware fault or any issues during controller boot.

Excessive controller A restarts detected

Also, noticed that you have already reseated the controller with no luck.

Please check your DM for details.

Query: Controller A rebooted after a network issue and shows as none on the array

support_s — Thu, 29 Aug 2024 13:46:07 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Query: Controller A rebooted after a network issue and shows as none on the array

Bilal786 — Mon, 18 Nov 2024 03:44:45 GMT

We are also facing the same issue. Did you fid the solution?