Modify Volume ACL with CLI

tkutil115 — Wed, 19 Aug 2020 16:15:43 GMT

I have both an initiator group and chap user on my volumes. I want to remove the chap user and i dont want to use the gui.

Im trying to use this command: vol --removeacl VMWARE7-002 --apply_acl_to both --chapuser WCG-CLUSTER and keep getting this. ERROR: Failed to remove access control record. AccessControlRecord '064ebc54516d750de1000000000000000000000144' was not found.

Re: Modify Volume ACL with CLI

Candhade — Wed, 02 Sep 2020 10:03:47 GMT

I replicated the issue in our lab array. If i try removing the ACL using the below command, i also received the same error.
Nimble OS $ vol --removeacl <VOLUME NAME> --apply_acl_to both --chapuser <CHAP USER NAME>
ERROR: Failed to remove access control record. AccessControlRecord '06151cd5223c3835bc000000000000000000000002' was not found.

It worked when i used the command with --initiatorgrp <INITIATOR GROUP NAME>
Nimble OS $ vol --removeacl <VOLUME NAME> --apply_acl_to both --chapuser <CHAP USER NAME> --initiatorgrp <INITIATOR GROUP NAME>

After the above step in CLI, I observed in GUI, the CHAP user is no longer linked to the volume.

topic Modify Volume ACL with CLI in HPE Nimble Storage Solution Specialists

Modify Volume ACL with CLI

Re: Modify Volume ACL with CLI