topic Re: Correct way to add another nimble dhci to an existing dhci environment in HPE Nimble Storage Solution Specialists

Correct way to add another nimble dhci to an existing dhci environment

Rafael_31 — Thu, 09 Sep 2021 15:49:32 GMT

Hi all,

anyone can help me with the correct way to add another array to an existing dhci environment? Is the correct way to add the new array to the already existing group? Can't find any clear information about that.

Thanks in advance

Rafael

Re: Correct way to add another nimble dhci to an existing dhci environment

Mahesh202 — Thu, 09 Sep 2021 04:57:37 GMT

Hi Rafael

Thank you for coming to the HPE Community forums

I request you to have a look at the below video which demonstrates on How to deploy HPE Nimble Storage dHCI in an existing HPE ProLiant environment

Video URL: https://www.youtube.com/watch?v=DCEQFtrEr_A

Hope this helps.!

Regards
Mahesh.

Re: Correct way to add another nimble dhci to an existing dhci environment

Chandramohan_r — Thu, 09 Sep 2021 05:01:46 GMT

Hi @Rafael_31

You can add a dHCI array to an existing group.

https://infosight.hpe.com/InfoSight/media/cms/active/public/pubs_GUI_Administration_Guide_5_2_x.pdf

Please do refer the section "Adding Arrays to a Group"

Please make a note that the array you want to add to will lose its group-specific configuration such as WWNN and WWPN, IP addresses and acquire these characteristics from the group you are merging with.