FAN error on a nimble array Cs1000

FAN1_error — Tue, 10 Oct 2023 07:55:17 GMT

I have damage fan in a nimble array, but it is in a remote location and wondering if there is a command to get the part number for the FAN as I can't validate phisically.

Regards

Re: FAN error on a nimble array Cs1000

FAN1_error — Mon, 09 Oct 2023 21:46:04 GMT

HEAD SHELF MODEL CS1000

Re: FAN error on a nimble array Cs1000

Mahesh202 — Tue, 10 Oct 2023 06:17:43 GMT

Please run this command to locate the fan and the details of it -- > shelf --info {shelfSerial} --array {arrayName}

There are four field replaceable mid-plane fans, two for each slot, A and B as well as two fans are (NOT field replaceable) directly attached to the controller/expander

To check which fans are faulty, please run the below commands.

To check the controller info run the command --> Ctrlr --info ctrlr_name

To validate the fan running at good RPM run the command (to locate the fan)--> Shelf --info shelf_serial

If you require replacing the fan, I suggest you contact the HPE Nimble tech support with all the information of the commands and they will help resolve this.

I hope this helps.!!

Regards
Mahesh

topic FAN error on a nimble array Cs1000 in HPE Nimble Storage Solution Specialists

FAN error on a nimble array Cs1000

Re: FAN error on a nimble array Cs1000

Re: FAN error on a nimble array Cs1000