topic Re: HP OneView port configuration in HPE OneView

HP OneView port configuration

Jacob_Just — Thu, 18 Sep 2014 12:00:15 GMT

Is it possible to change the port configuration on the OneView server, we would like to configure another port for smcb instead of 5671.

Best Regards

Jacob

Re: HP OneView port configuration

ChrisLynch — Thu, 18 Sep 2014 16:27:36 GMT

Hello, and welcome to the HP OneView Commutiy Forums.

Unfortunately, that is not supported or possible. Can you help me better understand why would you need or want to change the SCMB TCP port?

Re: HP OneView port configuration

Jacob_Just — Fri, 19 Sep 2014 05:35:28 GMT

This is because of a firewall setup, we dont have OneView and our software on the same network.

Best Regards

Jacob

Re: HP OneView port configuration

ChrisLynch — Fri, 19 Sep 2014 14:05:15 GMT

Well, there are specific ports that are required for OneView to operate. Is there a security reason why the OneView appliance cannot be on the same management network as the infrastructure it is managing?

Re: HP OneView port configuration

Jacob_Just — Mon, 22 Sep 2014 06:26:34 GMT

In this specific case it´s our QA team located at a different location, but I could imagine large customers to have the same isuue.

Re: HP OneView port configuration

ChrisLynch — Mon, 22 Sep 2014 16:56:01 GMT

I do work with some of the largest Fortune 500 customers, and modifying the appliance TCP ports has not become an issue, or request. We do value feedback from all sources, and I'll provide yours back to the product team. But as it stands today, the default ports configured in HP OneView cannot be modified.