topic Re: Alerting from iLO in HPE OneView

Alerting from iLO

Mazzemion — Thu, 25 Aug 2016 18:50:37 GMT

HP Oneview 2.00.07-0250853 running on the vcenter appliance

DL380 g7 monitoring license

Alerts from the iLO don't seem to show up in Oneview. I have a critical alert on the server at the moment I can see if I log into the iLO but nothing in Oneview. Is there anything else I need to configure to get these to show up?

Re: Alerting from iLO

Chris_L1 — Fri, 26 Aug 2016 14:53:30 GMT

I have been looking for the same - it appears that HPE does have such capabilities in the ILO as well as OneView - but AMS traps have to be configured on each ILO and AMS installed on each server and it appears to only work with ILO-4.

http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=5410258&docLocale=en_US&docId=emr_na-c04950825

This is what I have found so far...

Re: Alerting from iLO

ChrisLynch — Sun, 28 Aug 2016 20:51:06 GMT

Did you add the your DL380 G7 server to the appliance? You cant just configure the iLO to forward SNMP trap to the appliance.

Re: Alerting from iLO

Mazzemion — Tue, 30 Aug 2016 15:40:21 GMT

Yes, it's been added in. Everything is showing up okay, no alerts. It just isn't making any mention of a failed drive on the machine.