topic Re: OneView for VMware vCenter v8.0.1: VASA URL Not working in HPE OneView

OneView for VMware vCenter v8.0.1: VASA URL Not working

Edward L. Haletky — Fri, 02 Sep 2016 15:59:42 GMT

Hello,

I have my HPE StoreVirtual VSA configured into HPE OneView for VMware vCenter 8.0.1 just fine. I can see the VASA Provider URL. Which I copy and try to register. This is a brand new install of OV4VC. It says to pick up the certificate which I do after inspecting. The CN of the certificate and the provider URL match. However, vCenter says the certificate is either malformed, CN does not match, or some other error. I have also attempted to use the certificate directly from OV4VC as there is an option to get the provider certificate. Once more there is failure.

I am at a loss, I am unsure why such an error would occur.

OV4VC is setup with a network for management for vCenter, and a Network for iSCSI management and data. So it has 2 network cards configured.

I am using the default self-signed certificate created by OV4VC. My StoreVirtual is using v12.6 and was just updated.

Also, this used to work with earlier versions of IC4VC.

Thoughts?

Edward L. Haletky

Re: OpenView for VMware vCenter v8.0.1: VASA URL Not working

Ptyool — Fri, 26 Aug 2016 14:26:05 GMT

Hi Edward,

Again I got the same problem as you. I'm unable to register OV4VC VASA URL with my vCenter.

vCenter saying that the certificate is not valid, empty, incorrect, expired, revoked or the hostname check as failed. (see screenshot attached)

Did you find a way to register it ?

Regards,

Julien.

Re: OneView for VMware vCenter v8.0.1: VASA URL Not working

Edward L. Haletky — Fri, 02 Sep 2016 16:08:52 GMT

Hello,

I am beginning to wonder if it is a SHA1 certificate problem. Mine happens to be SHA1.... I am in the midst of creating a local CA actually. Not sure how well that will work. I have not found any reason why this would fail yet. Logs do not show much.

I wonder if the reason is related to https://kb.vmware.com/kb/2079087 which is a v5.5 issue with instructions for fixing it on a windows based vCenter. Need to translate to the VCSA somehow....

However, I do not think it is this as I just configured VSAN and the VASA providers registered just fine.

Best regards,

Edward L. Haletky

Re: OneView for VMware vCenter v8.0.1: VASA URL Not working

Edward L. Haletky — Fri, 02 Sep 2016 16:13:48 GMT

Hello,

Nothing appears in any logs on the HPE side when I go to register, what I do see is a message inside the VMware WebClient about unable to register as the 'certificate is untrusted'. Yet, I manually approved the cert.. I doubt the request is going anywhere near OV4VC. THe following appears BEFORE I approve the certificate.

The "Register new storage provider" operation failed for the entity with the following error message.
The provider certificate is untrusted.

Best regards,

Edward L. Haletky

Re: OneView for VMware vCenter v8.0.1: VASA URL Not working

Edward L. Haletky — Fri, 02 Sep 2016 17:14:39 GMT

Hello,

I just went through the certificates for SMS using

/usr/lib/vmware-vmafd/bin/vecs-cli entry list --store SMS --text |more

and the SMS certificate is not expired. The OV4VC certificate is not expired. Not sure what else is up...

Best regards,

Edward L Haletky

Re: OneView for VMware vCenter v8.0.1: VASA URL Not working

V12 — Fri, 09 Sep 2016 23:05:00 GMT

create the self signed certificate inside of the HPE Mangement menu. this problem will go away. then you have to get around a login issue which im working on. the self signed cert is not created by default

Re: OneView for VMware vCenter v8.0.1: VASA URL Not working

Edward L. Haletky — Sat, 10 Sep 2016 16:55:17 GMT

Hello,

Well you still get the bad cert error (or a self-signed cert error). However, you can work past this. I just found the solution to the user.... It is not a user on the storage or one inside OV4VC, it is one you setup inside vCenter with the appropriate permissions. Well since I did not know those perms, I created a vCenter user with Admin rights... Now I use SSO for this.

Now I wish I could limit this user to just VASA rights. However, I have not found a limited set. So for now I am using a separate user so I can track what the user does within LogInsight using my content pak that does just that (https://github.com/Texiwill/aac-lib/vli).

Best regards,

Edward L. Haletky

Re: OneView for VMware vCenter v8.0.1: VASA URL Not working

Ptyool — Wed, 14 Sep 2016 06:47:41 GMT

Thank you both of you, I can confirm that I'm able to register OV4VC VASA provider after regenerate a self-signed certificate and use an admin vCenter account (using sso-domain\account and not account@sso-domain).

However I don't understand why the account neeeded is one from the vCenter and not from OV4VC... When you register the 3PAR VASA provider directly the account needed is one from the 3PAR...

By the way, I noticed that the VASA version is 1.0 with OV4VC and not 2.0, so I can't use vvol for example, is it the same for you?

Regards,

Julien.