topic Re: OneView how to refresh dns cache in HPE OneView

OneView how to refresh dns cache

RubenDaendliker — Tue, 25 Oct 2016 08:50:35 GMT

We monitor our servers with oneview 2.0. After a location change of the servers oneview can't find the ilo address anymore because at the new location the servers ilo has a new dhcp adress.
I have restarted the oneview appliance but it still tries to connect to the old ip address. How can I refresh the ipconfig of the appliance or why does the appliance tries to connect to the ip address instead of the dns address.

I don't want to remove all servers and add all again.

Thanks for an advice.

Ruben

Re: OneView how to refresh dns cache

ChrisLynch — Tue, 01 Nov 2016 18:20:37 GMT

A refresh of the Server Hardware should prompt you to provide the iLO IP Address/FQDN and credentials. If you are not prompted, I would ask that you open a support case to resolve this issue.

Re: OneView how to refresh dns cache

RubenDaendliker — Mon, 07 Nov 2016 10:38:02 GMT

This is correct but it is not very efficient when I have to do it on dozens of servers.

Re: OneView how to refresh dns cache

martin2176 — Wed, 09 Nov 2016 13:34:13 GMT

multi select capability (shift or control ) key does not work on hardware refresh.
I wish multiselect capability was present for all functions