https://community.hpe.com/t5/hpe-oneview/ilo-ntp-server-when-adding-new-server-to-oneview/m-p/6969244#M1910 <P>No, and it is for a very good reason.&nbsp; We don't want logs that OneView can report on be a completely different time than the iLO.&nbsp; We advise you set the appliance to use a specific NTP server or servers, or your Hypervisor host.&nbsp; That way, your systems are in the correct time sync.</P> Tue, 27 Jun 2017 03:26:44 GMT ChrisLynch 2017-06-27T03:26:44Z https://community.hpe.com/t5/hpe-oneview/ilo-ntp-server-when-adding-new-server-to-oneview/m-p/6968926#M1909 <P>Hello</P><P>according to the user guide and several documentations like&nbsp;<A href="http://h17007.www1.hpe.com/docs/enterprise/servers/oneviewhelp/cic/en/content/s_server-hardware-mgmt-effects-fusion.html" target="_blank">Documentation</A>&nbsp;(third bullet point) the OneView server is set as NTP server for the added server.</P><P>Is there any possibilty to disable or configure this? I actually do not want to override the already existing NTP server configuration.</P><P>Thanks</P> Thu, 22 Jun 2017 12:53:59 GMT https://community.hpe.com/t5/hpe-oneview/ilo-ntp-server-when-adding-new-server-to-oneview/m-p/6968926#M1909 user_name 2017-06-22T12:53:59Z https://community.hpe.com/t5/hpe-oneview/ilo-ntp-server-when-adding-new-server-to-oneview/m-p/6969244#M1910 <P>No, and it is for a very good reason.&nbsp; We don't want logs that OneView can report on be a completely different time than the iLO.&nbsp; We advise you set the appliance to use a specific NTP server or servers, or your Hypervisor host.&nbsp; That way, your systems are in the correct time sync.</P> Tue, 27 Jun 2017 03:26:44 GMT https://community.hpe.com/t5/hpe-oneview/ilo-ntp-server-when-adding-new-server-to-oneview/m-p/6969244#M1910 ChrisLynch 2017-06-27T03:26:44Z