topic Re: Determining server hardware type in HPE OneView

Determining server hardware type

Kerry Quillen — Wed, 01 Nov 2017 19:35:43 GMT

Is there a way to determine what the hardware type of a server is prior to adding it to Oneview? For instance, I have a number of Gen8 blades that Oneview identifies with a -1 through -4 suffix. Each requires its own template and profile. I'd like to determine this hardware type before importing my remaining enclosures so i could precreate my profiles. Thanks in advance.

Re: Determining server hardware type

ChrisLynch — Wed, 01 Nov 2017 22:09:58 GMT

The Server Hardware Type is automatically created based on the following characteristics:

Base server model (i.e. BL460c Gen9)
Adapter model and location.

If the remaining enclosures have the same hardware as what you already have, no further Server Hardware Types will be created.

Re: Determining server hardware type

Kerry Quillen — Thu, 02 Nov 2017 14:19:54 GMT

the remaining enclosures do have the same hardware as what I already have in Oneview. But in order to precreate my profiles I have to know the specific hardware types - are the BL460C Gen8-2, BL460C Gen8-3, etc?

Re: Determining server hardware type

ChrisLynch — Thu, 02 Nov 2017 14:23:04 GMT

Yes.

And you can rename those resources to something more descriptive for you. For instance, if one of the BL460c Gen8 1 resources contains a certain type of adapter layout for a specific workload, rename it to something descriptive for the workload.