topic Re: Setting the unit for temperature in HPE OneView

Setting the unit for temperature

ChrisTan_1 — Sat, 17 May 2014 08:41:56 GMT

Hi,

I noticed some inconsistent behaviour with Oneview when displaying the enclosure temperature. At most times, it would display temperature in Farenheit, even though my enclosure was setup to show temperature in Celsius. Then once it showed the temperature in Celsius.

So I wanted to know if the unit for temperature is set up in Oneview or does it pick it up from the enclosure settings?

Re: Setting the unit for temperature

ChrisLynch — Mon, 20 Aug 2018 06:33:06 GMT

Temperature unit value is actually controlled by your browser regional settings, not the enclosure. This should be documented in the User Guide at http://hpe.com/info/oneview/docs

Re: Setting the unit for temperature

paymanzox — Sun, 19 Aug 2018 10:44:46 GMT

it seems link not work properly!

Re: Setting the unit for temperature

VidyaVI — Mon, 20 Aug 2018 06:34:39 GMT

Hi,

Above link as been fixed and is working as expected now.