https://community.hpe.com/t5/hpe-oneview/port-groups-behavior/m-p/7016590#M3297 <P>Hi Everyone,</P><P>At the moment we have not configured the port groups in the storage system and therefore OneView (we are using v 3.10.04) zone each HBA port with all 3PAR ports connected to the same fabric.<BR />We would like to reduce the number of 3PAR ports in each zone using the port groups.</P><P>After defining the port groups, will OneView automatically change the zones already created in the past or will the port groups be used only for the new servers profile ?</P><P>Please can you help me understand what OneView does, especially with the already existing zones,&nbsp; after I define the port groups?</P><P>Thanks in advance.</P> Fri, 31 Aug 2018 08:03:43 GMT Massimiliano Fontanella 2018-08-31T08:03:43Z https://community.hpe.com/t5/hpe-oneview/port-groups-behavior/m-p/7016590#M3297 <P>Hi Everyone,</P><P>At the moment we have not configured the port groups in the storage system and therefore OneView (we are using v 3.10.04) zone each HBA port with all 3PAR ports connected to the same fabric.<BR />We would like to reduce the number of 3PAR ports in each zone using the port groups.</P><P>After defining the port groups, will OneView automatically change the zones already created in the past or will the port groups be used only for the new servers profile ?</P><P>Please can you help me understand what OneView does, especially with the already existing zones,&nbsp; after I define the port groups?</P><P>Thanks in advance.</P> Fri, 31 Aug 2018 08:03:43 GMT https://community.hpe.com/t5/hpe-oneview/port-groups-behavior/m-p/7016590#M3297 Massimiliano Fontanella 2018-08-31T08:03:43Z