topic Virtual Connect Add with error in HPE OneView

Virtual Connect Add with error

Ovadm — Thu, 08 Nov 2018 07:23:16 GMT

Hi all

i use Ov V-4.10.01 , I recently encountered a problem that Although Every thing look like work with no problem.

InterConnect firmware Version is 4.62

i notice 2 Issue :

1 . on Enclosures - the interconnect is Red BUT Down link port is Ok !

2. When i Go to interconnect On General Tab > State : Added with Error .

I try to :

1 . Refresh is system

2 Clear port Counters

3 Reaplay Config

4 Reset loop And Pause Flood

5 Replace the Virtual Connect

Its Happening in more the One System

and one else experience ths issue ?
Or is there A known matter to some one ?

Re: Virtual Connect Add with error

Kamalji — Tue, 09 Oct 2018 06:46:21 GMT

The reported condition need investigation to identify the existing conditions and the source of the error to suggest the solution ..

Kindly logs a formal support call at HPE Customer Support Center .

Take error snap shot
Oneview LE support dump
Date &time when error started
Last change made to see the error
Date & time when last change was made ?
OA showall
This will help to intiiate a investigation and addition logs might required later by the support engineer based on the complexcity of the issue ..

Re: Virtual Connect Add with error

Ovadm — Thu, 08 Nov 2018 06:51:09 GMT

Hi -

I solved this issue

it was problem with the LACP Config on the NETWORK SWITCH !

i dont realy understand why it was reflected in this way on the Virtual Connect And one view

But on the moment it fix it