topic Re: Engineering change request in HPE OneView

Engineering change request

BradV — Tue, 07 Jan 2020 10:48:27 GMT

I'd like to start a dialogue about some of the changes I'd like to see in OneView. The first and formost is de-coupling server profile updates to the BIOS/OS and iLO. Changes made in the server profile template/server profiles that correspond to iLO, should not require the server to be shut down prior to applying. This makes it very difficult to schedule. Everyone, if they are fallowing good security practices, has to periodically change passwords. My organization goes to an absurd extreme and makes me change my administrative password weekly. So, when I set up a server profile template defining access to our active directory and have to use my administrative account to make that connection, it is only good for at most a week. As soon as I update it with my new password, those servers with profiles applied from that template already then are flagged as not being compliant with the template. It makes things very messy. When applying a server profile to a server, OneView should be able to tell if the only changes you are applying are relative to iLO and go ahead and apply them even if the server is powered on.

Another change is also related to iLO. I'd like to be able to define:

Idle connection timeout
Disabling ipv6
Disable/Enable DDNS server registration
Disable/Enable WINS server registration
Set the iLO domain name
Set the encryption security state
Set/update iLO firmware repository sets

I'm sure there are a lot more, but that will do to start the discussion.

Re: Engineering change request

BradV — Tue, 07 Jan 2020 12:11:40 GMT

Thought of another one. Can OneView be setup to hold a copy of the Gen 9 & 10 Intelligent Provisioning ISO and then have a directive to a server to boot from that ISO and update?

Re: Engineering change request

ChrisLynch — Tue, 07 Jan 2020 17:08:55 GMT

Thanks for your feedback. Please know that in a public forum we will be limited in what can and cannot be discussed.

As to your input about iLO configuration, that can be done while the server is powered on. You must have another change staged that requires the server to be powered off. You can get the preview of changes by issuing a GET /rest/server-profiles/{id}/compliance-preview.

The other iLO items you have expressed to be managed are things we are looking at to support in the future.

As for Intelligent Provisioning, we no longer require it for OneView operations. It is not available as an SPP component, and is a rather large resource (we have a finite amount of internal capacity).

Re: Engineering change request

BradV — Wed, 08 Jan 2020 09:46:45 GMT

Thanks Chris! I'll give that a test.