topic How often does OneView poll the monitored server hardware (iLO)? in HPE OneView

How often does OneView poll the monitored server hardware (iLO)?

NJK-Work — Thu, 05 Mar 2020 20:17:00 GMT

How often does OneView check to see if an iLO is still up (on the network)? I read somewhere in another post that OneView does a Refresh every 20 minutes, but I am assuming that is different from polling a device to see if it is up/down. Specically, I am refering to the "server-hardware.mp.ILOUnreachable" alerts that are generated whenever an iLO is not talking on the network.

Thanks

Re: How often does OneView poll the monitored server hardware (iLO)?

Suvamay — Mon, 09 Mar 2020 09:01:02 GMT

Hello .

Oneview poll the server hardware in every 20 min.

Thanks

Re: How often does OneView poll the monitored server hardware (iLO)?

berndghp — Wed, 07 Feb 2024 12:52:39 GMT

Is there a way to modify the polling interval for the detection of a server alert when a hardware error occurs?

In oneview version 8.70 it takes about 20 minutes before the alert is visible and the notification is sent by mail.

Similarly, after an error has been rectified, for example power restore on a power supply unit, it takes 20 minutes before the notification is sent with status ok.

Re: How often does OneView poll the monitored server hardware (iLO)?

Sunitha_Mod — Thu, 08 Feb 2024 06:06:29 GMT

Hello @berndghp,

Thank you for writing to us!

You might want to consider creating a new topic by utilizing the "New Discussion" button, as this will not only enhance visibility compared to the old topic but also boost your chances of receiving responses from experts.