topic Re: Invalid Firmware Bundle Detected in HPE OneView

Invalid Firmware Bundle Detected

Scott Caryer — Tue, 25 Feb 2020 15:17:24 GMT

I am trying to create a custom SPP Firmware bundle. Every time I create a new one and download it from HPe's web site, and attempt to upload it to any of my 3 x Oneview 5.0.01 appliances, I am getting an "Invalid Firmware bundle detected". Any thoughts or advise? Thanks in advance...Scott

Re: Invalid Firmware Bundle Detected

ChrisLynch — Tue, 25 Feb 2020 17:15:58 GMT

Are you building custom SPP's from https://spp.hpe.com/custom? What is the source SPP you are building from? Or are you simply downloading the full SPP from our site? Have you compared the provided MD5 or SHA1 hash to ensure the ISO download isn't corrupt?

Re: Invalid Firmware Bundle Detected

AlessandroSys — Fri, 16 Oct 2020 08:45:06 GMT

Hi Chris, I have the same Scott's issue. Every time I download a custom SPP from https://spp.hpe.com/custom, after that I had upload ISO file in oneview console, the system show me as follow: "Unable to upload the firmware bundle file xxx.iso: invalid firmware bundle detected. Resolution Remove the current firmware bundle file and upload a valid firmware bundle."

This is my Oneview Version: 5.40.00-0423953

Can you help me?

Regards.

Re: Invalid Firmware Bundle Detected

DanCernese — Fri, 16 Oct 2020 15:20:39 GMT

HPE OneView looks for certain required inventory items in custom built SPPs. The message could be clearer about what components are required, it's possible for example that you're missing OA or VC for a c7000 environment. Can you say more about what you're downloading-- is it a full SPP with hotfixes or a customized inventory?

Re: Invalid Firmware Bundle Detected

ChrisLynch — Fri, 16 Oct 2020 16:00:27 GMT

OneView has relaxed what is required witin a baseline starting with OneView 5.20. That means that if a component that was required before, the baseline will no longer be rejected if not present, and a warning message will appear on the appliance stating what component was missing.

But this message is quite different from the one I was just describing. Did you make sure that the baseline ISO is bootable? If not, then you need to go back and create a new ISO that is bootable, as that is a required component to the ISO image.

Otherwise, can you PM me a location to the ISO image so I can take a look at it?

Thank you Re: Invalid Firmware Bundle Detected

AlessandroSys — Mon, 19 Oct 2020 11:59:45 GMT

Hi Chris, today I tried to download a bootable ISO, now it works!

Thank you!

Re: Thank you Re: Invalid Firmware Bundle Detected

ChrisLynch — Mon, 19 Oct 2020 16:43:41 GMT

Excellent @AlessandroSys . Glad you have it working.