topic c3000 support for OneView in HPE OneView

c3000 support for OneView

mattstiltedview — Thu, 08 May 2014 02:14:14 GMT

Hi,

We recently purchased a c3000 and HP OneView, only to discover that our chassis is not supported.

Are there plans to support the c3000 in a future release of HP OneView?

Thanks,
Matt

Re: c3000 support for OneView

ChrisLynch — Thu, 08 May 2014 04:43:56 GMT

Hello, and welcome to the HP OneView forums. I wish I had better news, but the c3000 is not supported. We do continuously look at customer feedback to help prioritize enhancements and new features. However, I cannot comment on unreleased or unannounced versions in a public forum.

Re: c3000 support for OneView

Steve-AU — Fri, 04 Sep 2015 05:06:34 GMT

I know this is an old post but the c3000 is still a current model. Any word on adding support?

Re: c3000 support for OneView

ChrisLynch — Fri, 04 Sep 2015 14:02:05 GMT

At this time, we have no plans to offer support for the C3000 enclosure and HP OneView. As I stated above, we do take all feedback to help prioritize features. I would ask that you reach out to your HP Account Team and/or HP Partner to discuss this further.

Re: c3000 support for OneView

Steve-AU — Tue, 08 Sep 2015 06:58:59 GMT

Ok thanks Chris. I may mention it but I am guessing it is probably not really worth it at this point. We my just need to stick with HP SIM to monitor blades in this chassis.

Re: c3000 support for OneView

Aurelien-BdB — Fri, 25 Sep 2015 12:10:16 GMT

Hello,

I undertstand the c3000 will not be supported by One View.

Ok, but, what can I use to monitor blade inside a c3000 ?

The blade are all ESXi 5.5 with D2200sb attached.

Thanks for your answer.

Re: c3000 support for OneView

ChrisLynch — Fri, 25 Sep 2015 15:51:20 GMT

At this time, we are instructing customers to continue to use SIM or Insight Control to monitor their C3000 enclosures and its components.

Re: c3000 support for OneView

Edward L. Haletky — Mon, 20 Jan 2020 15:46:41 GMT

Hello,

As an aside, I have been using HPE OneView with a C3000 since OneView came out and it does work for monitoring at least. With the latest versions, the only part of HPE OneView that does not work as expected is capturing the enclosure itself. You can still monitor the blades and storage, but not 100% of the enclosure or interconnects. I see alerts on blades and other issues show up. The Enclosure refresh/add fails at the port-mapping stage, but everything else is pulled in and it works to that extent. THe blades themselves also contain port mapping.

As one tool to assist in monitoring I much prefer OneView over HP SIM even with this limitation. However, as I stated, you do not get 100% of the monitoring and I do not suggest you use it for management. But then in a smaller environment there are also other ways to perform management.

Just some thoughts on this issue.... It is definitely not supported but using it purely for monitoring blades may be useful to others.

Re: c3000 support for OneView

ChrisLynch — Tue, 21 Jan 2020 15:44:37 GMT

The HPE BladeSystem c3000 enclosure has not been supported in any capacity.. Unfortunately, we have no plans to add support for the c3000 enclosure, no matter if "it worked in a prior release".