OneView-Configure Server Profile-missing things

geoann — Tue, 24 Jan 2023 03:48:23 GMT

Hi,

We have new installed Oneview and we try to configure Server Profile for ML 110 and DL360 Gen 10 servers.
But there is couple of things that I cannot find and not working.
Before I install server I wish to reset server to factory defaults, both BIOS/ILO and Array controller settings/configuration.

* Where do I configre BIOS admin account and password? cannot find it in BIOS settings.
* Is it possible to reset array controller and wipe configuration and array? and where is the function in that case.

//Georg

Re: OneView-Configure Server Profile-missing things

ChrisLynch — Mon, 23 Jan 2023 23:59:18 GMT

Before I install server I wish to reset server to factory defaults, both BIOS/ILO and Array controller settings/configuration.

There is no option reset the system to factory from HPE OneView.

Before I install server I wish to reset server to factory defaults, both BIOS/ILO and Array controller settings/configuration.

You cannot as this would lock out products like HPE OneView from being able to configure and manage BIOS settings as that password must be provided everytime settings needed to be updated.

Before I install server I wish to reset server to factory defaults, both BIOS/ILO and Array controller settings/configuration.

This is done within the Local Storage controller setting. There is an option to "Re-initialize internal storage", which will clear any existing logical drive configuration (documented here).

topic OneView-Configure Server Profile-missing things in HPE OneView

OneView-Configure Server Profile-missing things

Re: OneView-Configure Server Profile-missing things