https://community.hpe.com/t5/hpe-oneview/serial-console-settings/m-p/7186606#M8078 <P>Hi All.</P><P>We have set up the ""BIOS Serial Console Baud Rate" by default to 115200 in OneView, however the default value in iLO is "Serial Command Line Interface Speed 9600". After applying template in the UEFI we can see the "115200", but in iLO it is still 9600. I am confused here, aren't those the same settings ? If not, what is the difference ?</P><P>Thx</P> Tue, 25 Apr 2023 01:15:14 GMT Workingman 2023-04-25T01:15:14Z https://community.hpe.com/t5/hpe-oneview/serial-console-settings/m-p/7186606#M8078 <P>Hi All.</P><P>We have set up the ""BIOS Serial Console Baud Rate" by default to 115200 in OneView, however the default value in iLO is "Serial Command Line Interface Speed 9600". After applying template in the UEFI we can see the "115200", but in iLO it is still 9600. I am confused here, aren't those the same settings ? If not, what is the difference ?</P><P>Thx</P> Tue, 25 Apr 2023 01:15:14 GMT https://community.hpe.com/t5/hpe-oneview/serial-console-settings/m-p/7186606#M8078 Workingman 2023-04-25T01:15:14Z https://community.hpe.com/t5/hpe-oneview/serial-console-settings/m-p/7186849#M8090 <P style="margin: 0;">Hi,&nbsp;</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">As per the below document (ILO User guide), the baud rate shows 115200.&nbsp;</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;"><A href="https://support.hpe.com/hpesc/public/docDisplay?docId=a00105236en_us&amp;docLocale=en_US&amp;page=GUID-A5120E22-ECAE-4417-A396-654355615B1C.html" target="_blank">https://support.hpe.com/hpesc/public/docDisplay?docId=a00105236en_us&amp;docLocale=en_US&amp;page=GUID-A5120E22-ECAE-4417-A396-654355615B1C.html</A></P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">Where in ILO it shows 9600 ? Provide the screenshot.</P> Sun, 23 Apr 2023 00:50:37 GMT https://community.hpe.com/t5/hpe-oneview/serial-console-settings/m-p/7186849#M8090 Kashyap02 2023-04-23T00:50:37Z