topic Re: Problems trying to create boot from SAN Server Profile in OneView in HPE OneView

Problems trying to create boot from SAN Server Profile in OneView

MattGG — Fri, 16 Oct 2015 18:46:29 GMT

Running OneView 1.20.05 with FlexFarbric 20/40, and 630FLB CNA on BL460c G9s blades.

Create new Server Profile and copied the WWPN from the FC Uplink as reported in OneView (included : in the address). Added the address to the FC Connection in the SP and set the LUN to 1. Applied Server Profile. Once complete went back into the SP and now it says Boot: Managed Manually and it is grayed out (can't change)

Thanks,

-MattGG

Re: Problems trying to create boot from SAN Server Profile in OneView

MeFromil — Sun, 27 Dec 2015 15:04:51 GMT

Is the server Power Off ?

Re: Problems trying to create boot from SAN Server Profile in OneView

ChrisLynch — Thu, 07 Jan 2016 23:23:50 GMT

Did you by chance set the Boot Order to Manage Manually? If you did, it would clear the Boot Parameters within the Connections. You must Enable 'Manage boot order' in the Server Profile in order to set the BfS settings in your Server Profile Connection(s).

Re: Problems trying to create boot from SAN Server Profile in OneView

Mladen_1 — Fri, 26 Feb 2016 15:21:36 GMT

Hi,

I have not FlexFabric but VC-FC (bay3 and bay4) trying to BFS but unsuccessfull.