topic Re: update oneview in HPE OneView

update oneview

bradawk1 — Mon, 24 Feb 2025 14:27:01 GMT

I thought there was a "pinned" discussion about OneView update paths? I can't seem to find it. Want to update from 8.8 to 9.3. Can I jump that far, or do I need an intermediate version?

Re: update oneview

PatrickLong — Mon, 24 Feb 2025 14:21:42 GMT

Looks like one intermediary step is required for your upgrade path 8.8 >> 9.10.01 >> 9.3 per the HPE Synergy Upgrade Paths table

If your firmware and drivers are already compliant with the latest SSP supported under your OV 8.8 (which is 2024.07.xx,) that same SSP is supported through 9.3 - so upgrading to a supported SSP in lockstep with your OneView stepwise upgrades is not required for your specific upgrade path, but I always recommend applying latest firmware when possible, so I encourage you to apply SSP 2024.11.02 when you get to intermediate 9.10.01 or your target version 9.3. As always, verify readiness prior to upgrade using the Oneview Upgrade Readiness Checker, and take OneView backups before and after each upgrade.

Re: update oneview

bradawk1 — Mon, 24 Feb 2025 14:25:15 GMT

Thanks. I will get that and work on it.

Re: update oneview

Rakshitha_K — Mon, 24 Feb 2025 14:35:49 GMT

Hi @bradawk1 ,

Please visit this link to check HPE OneView 6.x.x Non-Synergy Upgrade Paths 6.6 and later.
Please visit this link to check HPE Synergy Upgrade Paths

Regards
Rakshitha

Re: update oneview

ZanderStricklan — Fri, 07 Mar 2025 04:47:18 GMT

Thank you so much for sharing the link, it helped me.