topic Re: OneView Rack Configuration in HPE OneView

OneView Rack Configuration

mjhartf — Thu, 27 Mar 2025 17:01:17 GMT

I'm trying to setup a Rack in OneView with Apollos installed. I have 4 Apollos in a Chassis that takes up 2U's (2 Apollos on each U). The Chassis doesn't connect to the network, so it can't be managed. How do I add 2 Apollos to a 1U slot in Oneview?

Re: OneView Rack Configuration

TVVJ — Fri, 28 Mar 2025 05:27:02 GMT

Hello,

You may refer to section "Add a rack" of the OneView user guide and see if it helps.

Regards,

Re: OneView Rack Configuration

mjhartf — Fri, 28 Mar 2025 14:06:43 GMT

I've gone through the documentation. This doesn't apply. Basically, I'm trying to fit 2 devices into a 1U slot in the rack view. The chassis takes 2U's and has 4 devices/blades, 2 devices per 1U. OneView recognizes there's 4 blades in a chassis but the rack view doesn't allow me to add 2 devices to a 1U slot.

Re: OneView Rack Configuration

schwengels — Tue, 01 Apr 2025 14:45:19 GMT

Hello,

Sorry, I don't have an answer for you, but I wanted to comment on this as I have had the same issue and have also brought this up in the past. The explaination given in the past was that the chassis doesn't have intelligence built into it like a Synergy frame. However, it wouldn't have to in order to be representitive in a rack view. It would be great if HPE could add that functionality in a future release.

Thank you.

Re: OneView Rack Configuration

Rakesh0404 — Sat, 05 Apr 2025 02:54:46 GMT

Hi,

HPE OneView Appliance is a tool that helps manage HPE hardware like servers, storage, and networking from one place. It automates tasks like setting up servers and keeping firmware up to date, making it easier to manage and monitor your IT infrastructure. You can use it either as a physical device or as software on a virtual machine. It helps save time, reduces mistakes, and makes managing your hardware simpler.
It does not contain any physical hardware to maintain of configure or install.

Query: OneView Rack Configuration

support_s — Thu, 10 Apr 2025 11:02:45 GMT

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Re: OneView Rack Configuration

mjhartf — Thu, 10 Apr 2025 14:12:19 GMT

I have no issues with managing the servers in OneView. This issue is with setting up the visual representation in the Rack view. The option to set up a Left/Right/Center placement for the servers is there, but it only allows me to select the Center view option. I have 2 Apollos in a 1U slot, one for the Left side and one for the Right side.

How can I get the Position option to allow me to select Left or Right, not Center. If that's not an option, then why is the Position view even available?

Re: Query: OneView Rack Configuration

mjhartf — Fri, 11 Apr 2025 06:46:13 GMT

@Rakesh0404

How can I get the Position option to allow me to select Left or Right, not Center. If that's not an option, then why is the Position view even available?